Mazda MX5 Mk2 B6-ZE 25-Row Oil Cooler Relocation Kit with HKS Oil Filter

<section class='product-specific-copy kage-copy'><p>A vehicle-specific 25-row remote-filter relocation engine-oil-cooler kit with HKS filter for Mazda MX5 Mk2 B6-ZE, catalogued for 98/01->00/07. It combines the SKADI cooler with the hoses, fittings and oil-system hardware listed in the confirmed component record. Cooler mounting brackets are not included.</p><h3>Key features</h3><ul><li>25-row SKADI AN-10 oil cooler</li><li> Mazda MX5 Mk2 B6-ZE application</li><li> Remote-filter relocation arrangement</li><li> HKS-filter version</li><li> 98/01->00/07 catalogue coverage</li><li> Cooler mounting brackets not included</li></ul><h3>Design details</h3><p>The confirmed component record uses 7 distinct BOM lines, combining the 25-row cooler with the specified hose, fittings and remote-filter relocation hardware. As an SKO-3 kit, it does not include the vehicle-specific brackets needed to mount the cooler to the car.</p><h3>On the car</h3><p>The 25-row core provides the largest cooling area in this kit family for demanding sustained-load use where sufficient space and airflow are available. This non-thermostatic configuration routes oil through the cooler whenever the engine is running.</p><h3>Fitment notes</h3><p>Catalogued for Mazda MX5 Mk2 B6-ZE, covering 98/01->00/07. Confirm the exact engine, oil-filter interface, sealing face, centre-spigot engagement and available installation clearance before fitting. Choose a secure, accessible remote-filter position and plan the hose route before cutting and assembling the hose. SKO-3 kits do not include the brackets required to mount the cooler to the car; select a suitable airflow position and fabricate or source secure mounting brackets. The oil-filter thread is not yet confirmed; verify the exact engine-side interface before ordering.</p><p><strong>Important:</strong> Check every BOM item against the supplied kit before installation. Keep hoses clear of exhaust heat, sharp edges and moving parts; prime the oil circuit, pressure-test it, verify oil pressure and check for leaks before driving. Monitor oil temperature and avoid over-cooling during cold or low-load use. Mount the cooler securely and check clearance to bodywork, airflow paths and surrounding components before use.</p><p>A 25-row remote-filter relocation oil-cooler kit for Mazda MX5 Mk2 B6-ZE, supplied with the exact components listed above. Cooler mounting brackets are not included.</p><h3>What's in the box?</h3><ul><li>1 × SKADI 4m AN-10 hose, nylon with blue fleck (SKO-001)</li><li> 2 × SKADI AN-10 45 Degree Fitting Black (SKO-007)</li><li> 2 × SKADI AN-10 Straight Fitting Black (SKO-006)</li><li> 1 × HKS oil filter (52009-AK012)</li><li> 1 × SKADI Oil filter relocation plates (SKO-016)</li><li> 2 × SKADI AN-10 90 Degree Fitting Black (SKO-008)</li><li> 1 × SKADI Mocal Style Oil Cooler 25-rows, black with SKADI Logo, AN-10 (SKO-005)</li></ul></section>