Black, 15mm Thick, 5×120 T5/T6 to 5×114.3 Nissan Wheel Spacers/Adapters

A pair of PCD adapters.

These PCD adapters allow a 5 x 114.3 Nissan fitement wheel to be fitted to a 5 x 120 VW Transporter hub. They are 15mm thick and are supplied without the nuts to fix the spacer to the hub. They can be used with either M12 or M14 size bolts or studs.

This size PCD was used by VW on the T5 and T6 Transporter and a few of the other large vehicles.

Spacing the wheels on the car gives a more aggressive stance and can also improve handling.

Spacer Specification:

Colour – Black
Thickness – 15mm
PCD – 5 x 1120 hub, 5 x 114.3 wheel
Spigot – 65.1mm to 66.1mm
Hubcentric – Yes
Material – 6061-T6 Aluminium
Finish – Anodized
Construction – Forged
Thread – M12 x 1.25

Clearance Checking

– When fitting spacers it is important to ensure there is enough space in the wheel arch to clear the wheel and tyre. If there is not sufficient space to fit the spacers safely you will need to either roll the arches or modify the arches with a wide arch kit or similar.

– It is also vital that you check the wheel rotate freely after fitted and if using closed wheel nuts that they are not bottoming out on the studs.