Lexus GS430 3UZ-FE 25-Row Oil Cooler Kit

<section class='product-specific-copy kage-copy'><p>A vehicle-specific 25-row full-flow sandwich-plate engine-oil-cooler kit for Lexus GS430 3UZ-FE, catalogued for 05/08->11/12. It combines the SKADI cooler with the hoses, fittings and oil-system hardware listed in the confirmed component record. Cooler mounting brackets are not included.</p><h3>Key features</h3><ul><li>25-row SKADI AN-10 oil cooler</li><li> Lexus GS430 3UZ-FE application</li><li> Full-flow sandwich-plate arrangement</li><li> Standard-filter version</li><li> 05/08->11/12 catalogue coverage</li><li> Cooler mounting brackets not included</li></ul><h3>Design details</h3><p>The confirmed component record uses 6 distinct BOM lines, combining the 25-row cooler with the specified hose, fittings and engine-side take-off hardware. As an SKO-3 kit, it does not include the vehicle-specific brackets needed to mount the cooler to the car.</p><h3>On the car</h3><p>The 25-row core provides the largest cooling area in this kit family for demanding sustained-load use where sufficient space and airflow are available. This non-thermostatic configuration routes oil through the cooler whenever the engine is running.</p><h3>Fitment notes</h3><p>Catalogued for Lexus GS430 3UZ-FE, covering 05/08->11/12. Confirm the exact engine, oil-filter interface, sealing face, centre-spigot engagement and available installation clearance before fitting. Plan the cooler position and hose route before cutting and assembling the hose. SKO-3 kits do not include the brackets required to mount the cooler to the car; select a suitable airflow position and fabricate or source secure mounting brackets. The oil-filter thread is not yet confirmed; verify the exact engine-side interface before ordering.</p><p><strong>Important:</strong> Check every BOM item against the supplied kit before installation. Keep hoses clear of exhaust heat, sharp edges and moving parts; prime the oil circuit, pressure-test it, verify oil pressure and check for leaks before driving. Monitor oil temperature and avoid over-cooling during cold or low-load use. Mount the cooler securely and check clearance to bodywork, airflow paths and surrounding components before use.</p><p>A 25-row full-flow sandwich-plate oil-cooler kit for Lexus GS430 3UZ-FE, supplied with the exact components listed above. Cooler mounting brackets are not included.</p><h3>What's in the box?</h3><ul><li>1 × SKADI 4m AN-10 hose, nylon with blue fleck (SKO-001)</li><li> 2 × SKADI AN-10 45 Degree Fitting Black (SKO-007)</li><li> 2 × SKADI AN-10 Straight Fitting Black (SKO-006)</li><li> 1 × SKADI Oil filter sandwich plate w. AN-10 ports (SKO-015)</li><li> 2 × SKADI AN-10 90 Degree Fitting Black (SKO-008)</li><li> 1 × SKADI Mocal Style Oil Cooler 25-rows, black with SKADI Logo, AN-10 (SKO-005)</li></ul></section>