Volvo S60/S80/S90 Hubcentric Wheel Spacers 5×108, 20mm thick

This is a pair of forged hubcentric type wheel spacers, made from anodized aluminium and will space the wheel out 20mm on each side.

These are the spacers for the later Volvo’s where they changed to the M14 x 1.5 wheel bolts. If you car has the M12 x 1.5 studs in the hub then you will require the KWS-006 or KWS-009 spacers.

Part specifications

PCD : 5 x 108
Thickness : 20mm
Material : Aluminium
Finish : Black Anodized
Thread : M14 x 1.5 (wheel bolts)
Spigot : 63.4mm

When fitting this type of spacer it is essential to check that the bolts holding the wheel to the spacer do not protrude the spacer and touch the hub. The easiest way to check this is to take a wheel off the car and bolt the spacer to the wheel. If the wheel bolts protrude the face of the spacer you will need to either purchase shorter wheel bolts or shorted the existing bolts.