This exhaust system replaces everything on the car, the manifold, cat and the cat back.

Key features

• Cat-back rear exhaust system
• 2.5″ pipework · Stainless Steel construction · TIG-welded joints
• Fitting kit included
• Twin 3 1/4" Rolled tailpipe

Design details

The twin 3 1/4-inch tailpipes use a welded assembly to simplify alignment. The 2020 design revision also introduced a stronger flex section. Any warranty claim for a failed flex joint must include photographic evidence that the anti-roll bar was removed during installation.

Important fitment information

Please note that the tailpipe section has not been designed to be symmetrical Fits the Mini R53 Cooper S and R52 Cooper S models only. The early R53 pre-facelift had a slightly different hanger setup at the rear near the battery box and if you have one of these cars you might need to shorten the centre pipe slightly and bend the rear hanger brackets by 90 degrees to get everything to line up. As with all car modification a little fettling to get it to fit is often part of the fun. IMPORTANT FITTING NOTE: When. Fitting this manifold you will need to move the ARB out of the way to gain the clearance required.

It is made from 63mm tube. All welds are done using TIG for ultimate quality and looks. MANIFOLD 4 into 1 design for optimum street and performance.

What’s in the box?

• 1 × 10m of Black Exhaust Wrap with 10 Stainless Ties
• 1 × Tubular Exhaust Manifold
• 1 × Cat-Back Exhaust System
• 1 × Fitting Kit