Toyota MR2 3S-GTE 19-Row Oil Cooler Thermo Relocation Kit with HKS Oil Filter

<section class='product-specific-copy kage-copy'><p>The Toyota MR2 3S-GTE is a mid-engined application where available space, airflow and hose routing all need to be considered when adding an external oil cooler. A vehicle-specific 19-row thermostatic oil-filter relocation oil-cooler kit with HKS filter for Toyota MR2 3S-GTE models built from October 1989 to September 1999. It combines a black SKADI AN-10 cooler, cut-to-length hose and the fittings and oil-filter hardware listed in the confirmed BOM. Cooler mounting brackets are not included.</p><h3>Key features</h3><ul><li>Application-specific kit for Toyota MR2 3S-GTE, 89/10 to 99/09</li><li> 19-row black SKADI AN-10 oil cooler</li><li> 4m nylon-braided AN-10 hose with blue fleck</li><li> Thermostatic oil control to reduce unnecessary cooling during warm-up</li><li> Remote oil-filter relocation hardware included</li><li> HKS oil filter included</li><li> Cooler mounting brackets not included</li></ul><h3>Design details</h3><p>The system uses a black 19-row aluminium cooler, SKADI AN-10 nylon-braided hose and a selection of straight, 45-degree and 90-degree fittings for flexible routing. The relocation hardware moves the oil filter away from its original mounting point. Thermostatic control helps the oil reach operating temperature before directing full cooling flow through the core. As an SKO-3 kit, it does not include the vehicle-specific brackets needed to mount the cooler to the car.</p><h3>On the car</h3><p>The 19-row core adds dedicated heat-exchanger area for hard road, track and drift use, while the thermostatic arrangement helps avoid unnecessary cooling during warm-up and lower-load driving.</p><h3>Fitment notes</h3><p>Listed for Toyota MR2 models with the 3S-GTE engine, production dates 89/10 to 99/09. The 4m hose is cut to suit the chosen cooler and remote filter location. SKO-3 kits do not include the brackets required to mount the cooler to the car; select a suitable airflow position and fabricate or source secure mounting brackets. The recorded filter thread is 3/4-16 UNF. Thread compatibility alone does not confirm fitment: check the sealing-face diameter, centre-spigot engagement, filter clearance and surrounding installation space.</p><p><strong>Important:</strong> Choose a secure and accessible remote filter position, and check clearance around the oil-filter connection, fittings and hose routes before installation. Keep hoses clear of exhaust heat and moving parts, pressure-test the completed circuit and confirm oil pressure with no leaks before driving. Mount the cooler securely and check clearance to bodywork, airflow paths and surrounding components before use.</p><p>A complete 19-row thermostatic oil-filter relocation oil-cooler kit with HKS filter for the Toyota MR2 3S-GTE, supplied with the exact components listed above. Cooler mounting brackets are not included.</p><h3>What's in the box?</h3><ul><li>1 × HKS oil filter (52009-AK010)</li><li> 1 × SKADI 4m AN-10 nylon braided hose with blue fleck (SKO-001)</li><li> 2 × SKADI 45-degree AN-10 fittings (SKO-007)</li><li> 2 × SKADI straight AN-10 fittings (SKO-006)</li><li> 1 × SKADI oil-filter relocation plate set (SKO-016)</li><li> 1 × SKADI oil-filter relocation thermoplate (SKO-027)</li><li> 4 × SKADI 90-degree AN-10 fittings (SKO-008)</li><li> 1 × SKADI 19-row AN-10 oil cooler (SKO-004)</li></ul></section>